STANDARDI ZA FOTOGRAFIJO (IN GRAFIČNO TEHNOLOGIJO), KI JIH POKRIVA TEHNIČNI KOMITE ISO/TC 42, V SLOVENIJI SIST/TC GRT (Odbor za grafično tehnologijo)
Standarde lahko naročite na spletnem naslovu www.sist.si v rubriki ISKALO SIST.
MEDNARODNI STANDARDI ISO
|
Photography and graphic technology — Density measurements — Part 1: Geometry and functional notation
|
|
Photography and graphic technology — Density measurements — Part 2: Geometric conditions for transmittance density
|
|
Photography and graphic technology — Density measurements — Part 3: Spectral conditions
|
|
Photography and graphic technology — Density measurements — Part 4: Geometric conditions for reflection density
|
|
Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
|
|
Photography — Processing chemicals — Specifications for anhydrous sodium sulfite
|
|
Photography — Processing chemicals — Specifications for potassium bromide —
|
|
Photography — Processing chemicals — Specifications for p-methylaminophenol sulfate
|
|
Photography — Processing chemicals — Specifications for hydroquinone
|
|
Photography — Processing chemicals — Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate
|
|
Camera shutters — Timing — General definition and mechanical shutter measurements
|
|
Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification
|
|
Photography — Hand-held cameras — Flash-connector dimensions
|
|
Photography — 120-size and 220-size films — Dimensions
|
|
Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side
|
|
Photography — 135-size film and magazine — Specifications
|
|
Photography — Unprocessed photographic papers — Sheet dimensions
|
|
Photography — Paper dimensions — Rolls for printers
|
|
Photography — Films in sheets and rolls for general use — Dimensions
|
|
Photography — Roll film cameras — Back window location
|
|
Photography — Tripod connections
|
|
Photography — Determination of flash guide numbers for electronic flash equipment
|
|
Photography — Cameras using 35 mm film and roll film — Dimensions of picture sizes
|
|
Photography — Projector slides — Dimensions
|
|
Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of auxiliaries
|
|
Photography — Colour reversal camera films — Determination of ISO speed
|
|
Photography — General purpose photographic exposure meters (photoelectric type) — Guide to product specification
|
|
Photography — Film-based cameras — Automatic controls of exposure
|
|
Photography — Electronic flash equipment — Determination of light output and performance
|
|
Photography — Camera flash illuminants — Determination of ISO spectral distribution index (ISO/SDI)
|
|
Photography — Processing chemicals — Specifications for glacial acetic acid
|
|
Photography — Processing chemicals — Specifications for 1-phenyl-3-pyrazolidinone
|
|
Photography — Processing chemicals — Specifications for sodium hydroxide
|
|
Photography — Processing chemicals — Specifications for benzotriazole
|
|
Photography — Processing chemicals — Specifications for ammonium thiosulfate solution
|
|
Photography — Processing chemicals — Specifications for aluminium potassium sulfate
|
|
Photography — Processing chemicals — Specifications for sodium tetraborate decahydrate
|
|
Photography — Processing chemicals — Specifications for ammonium thiocyanate
|
|
Photography — Processing chemicals — Specifications for anhydrous potassium carbonate
|
|
Photography — Processing chemicals — Specifications for potassium ferricyanide
|
|
Photography — Processing chemicals — Specifications for potassium hydroxide
|
|
Photography — Processing chemicals — Specifications for potassium thiocyanate
|
|
Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite
|
|
Photography — Processing chemicals — Specifications for boric acid, granular
|
|
Photography — Processing chemicals — Specifications for potassium metabisulfite
|
|
Graphic technology and photography — Viewing conditions
|
|
Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications
|
|
Photography — Rolls of sensitized material for the pre-press industry — Dimensions and related requirements
|
|
Photography — Processing chemicals — Specifications for anhydrous sodium acetate
|
|
Photography — Medical radiographic cassettes/screens/films and hard-copy imaging films — Dimensions and specifications
|
|
Photography — Industrial radiographic films (roll and sheet) and metal intensifying screens — Dimensions
|
|
Photography — Electronic flash equipment — Automatic control of exposure
|
|
Photography — Direct-exposing medical and dental radiographic film/process systems — Determination of ISO speed and ISO average gradient
|
|
Photography — Colour negative films for still photography — Determination of ISO speed
|
|
Photography — Colour negative films for still photography — Determination of ISO speed — Technical Corrigendum 1
|
|
Photography — Pre-packaged chemicals for the processing of silver halide based photographic materials — Vocabulary
|
|
Photography — Processing chemicals — Specifications for potassium sulfite, 650 g/l solution
|
|
Photography — Shutter cable release tip and socket — Dimensions
|
|
Photography — Photographic materials — Determination of ISO resolving power
|
|
Photography — Photographic lenses — Distance scale markings
|
|
Photography — Camera lenses — Determination of ISO colour contribution index (ISO/CCI)
|
|
Photography — Black-and-white continuous-tone papers — Determination of ISO speed and ISO range for printing
|
|
Photography — Processing wastes — Determination of boron
|
|
Photography — Processing waste — Determination of total amino nitrogen (microdiffusion Kjeldahl method)
|
|
Photography — Processing waste — Determination of ammoniacal nitrogen (microdiffusion method)
|
|
Photography — Industrial radiographic films — Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation
|
|
Photography — Materials for direct-positive colour-print cameras — Determination of ISO speed
|
|
Photography — Illuminants for sensitometry — Specifications for daylight, incandescent tungsten and printer
|
|
Photography — Processing waste — Determination of hydroquinone
|
|
Processing photographic wastes — Analysis of cyanides — Determination of hexacyanoferrate (II) and hexacyanoferrate (III) by spectrometry
|
|
Photography — Black-and-white aerial camera films — Determination of ISO speed and average gradient
|
|
Photography — Black-and-white aerial camera films — Determination of ISO speed and average gradient — Technical Corrigendum 1
|
|
Photography — Determination of ISO safelight conditions
|
|
Photography — Electronic flash equipment — Connectors to synchro-cord
|
|
Photography — Sensitometry of screen/film systems for medical radiography — Part 1: Determination of sensitometric curve shape, speed and average gradient
|
|
Photography — Sensitometry of screen/film systems for medical radiography — Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography
|
|
Photography — Vesicular microfilm — Determination of ISO speed and ISO range
|
|
Photography — Source document microfilms — Determination of ISO speed and ISO average gradient
|
|
Photography — Flash exposure meter — Requirements
|
|
Photography — Synchronizers, ignition circuits and connectors for cameras and photoflash units — Electrical characteristics and test methods
|
|
Photography — Processing wastes — Determination of silver content
|
|
Photography — Photographic-grade chemicals — Test methods — Part 1: General
|
|
Photography — Photographic-grade chemicals — Test methods — Part 2: Determination of matter insoluble in water
|
|
Photography — Photographic-grade chemicals — Test methods — Part 3: Determination of matter insoluble in ammonium hydroxide solution
|
|
Photography — Photographic-grade chemicals — Test methods — Part 4: Determination of residue after ignition
|
|
Photography — Photographic-grade chemicals — Test methods — Part 5: Determination of heavy metals and iron content
|
|
Photography — Photographic-grade chemicals — Test methods — Part 6: Determination of halide content
|
|
Photography — Photographic-grade chemicals — Test methods — Part 7: Determination of alkalinity or acidity
|
|
Photography — Photographic-grade chemicals — Test methods — Part 8: Determination of volatile matter
|
|
Photography — Photographic-grade chemicals — Test methods — Part 9: Reaction to ammoniacal silver nitrate
|
|
Photography — Photographic-grade chemicals — Test methods — Part 10: Determination of sulfide content
|
|
Photography — Photographic-grade chemicals — Test methods — Part 11: Determination of specific gravity
|
|
Photography — Photographic-grade chemicals — Test methods — Part 12: Determination of density
|
|
Photography — Photographic-grade chemicals — Test methods — Part 13: Determination of pH
|
|
Photography — Root mean square granularity of photographic films — Method of measurement
|
|
Photography — Processing chemicals — Specifications for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate
|
|
Photography — Slide trays for projectors — Part 1: Straight slide tray, open type (European design)
|
|
Photography — Sheets of sensitized material for the pre-press industry — Dimensions and related requirements
|
|
Photography — Projection in indoor rooms — Part 1: Screen illumination test for still projectors
|
|
Photography — Projection in indoor rooms — Part 2: Screen luminance test for still and video projection
|
|
Digital imaging — Vocabulary — Part 1: Fundamental terms
|
|
Photography — Electronic still picture imaging terminology — Part 2: Other defined terms
|
|
Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index
|
|
Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index — Amendment 1: Determination of encoding-relative sensitivity (ERS)
|
|
Digital cameras — Resolution and spatial frequency responses
|
|
Digital imaging — Image storage — Part 1: Reference model
|
|
Electronic still-picture imaging — Removable memory — Part 2: TIFF/EP image data format
|
|
Electronic still picture imaging — Removable memory — Part 3: XMP for digital photography
|
|
Photography — 110-size cartridge, film and backing paper — Dimensions
|
|
Photography — 110-size cartridge, film and backing paper — Dimensions — Technical Corrigendum 1
|
|
Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs)
|
|
Photography — Room-light loading packages for electronic scanners and image-setting film and paper rolls — Dimensions and related requirements
|
|
Photography — Aerial films and spools — Dimensions
|
|
Photography — Dimensions of glass plates
|
|
Photography — Transmission and reflection densitometers — Method for determining performance
|
|
Photography — Composition of 135-size film canisters
|
|
Photography — Electronic still-picture imaging — Noise measurements
|
|
Photography — Electronic still picture imaging — Picture transfer protocol (PTP) for digital still photography devices
|
|
Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time lag
|
|
Photography — Spatial resolution measurements of electronic scanners for photographic images — Part 1: Scanners for reflective media
|
|
Photography - Electronic scanners for photographic images - Spatial resolution measurements — Part 2: Film scanners
|
|
Graphic technology and photography — Colour characterisation of digital still cameras (DSCs) — Part 1: Stimuli, metrology and test procedures
|
|
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 2: Considerations for determining scene analysis transforms
|
|
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 3: User controls and readouts for scene-referred imaging applications
|
|
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 4: Programmable light emission system
|
|
Graphic technology and photography — Colour characterization of digital still cameras (DSCs) — Part 5: Colour targets including saturated colours for colour characteristic evaluation test for colorimetric image capture
|
|
Photography — Processing chemicals — Specifications for 4-(N-ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate
|
|
Photography — Digital cameras — Geometric distortion (GD) measurements
|
|
Photography — Digital cameras — Shading measurements
|
|
Photography and imaging — Inkjet media: Classification, nomenclature and dimensions — Part 1: Photo-grade media (paper and film)
|
|
Digital imaging — Specification guideline for digital cameras
|
|
Photography — Digital cameras — Image flare measurement
|
|
Imaging materials — Processed silver-gelatin-type black-and-white films — Specifications for stability
|
|
Imaging materials — Processed imaging materials — Albums, framing and storage materials
|
|
Imaging materials — Films and paper — Determination of dimensional change
|
|
Imaging materials — Processed films — Method for determining lubrication
|
|
Imaging materials — Ammonia-processed diazo photographic film — Specifications for stability
|
|
Imaging materials — Photographic films — Specifications for safety film
|
|
Imaging materials — Photographic films and papers — Wedge test for brittleness
|
|
Imaging materials — Photographic film — Determination of folding endurance
|
|
Photography — Processed photographic colour films and paper prints — Methods for measuring image stability
|
|
Imaging materials — Photographic film and paper —- Determination of curl
|
|
Imaging materials — Processed safety photographic films — Storage practices
|
|
Imaging materials — Processed vesicular photographic film — Specifications for stability
|
|
Imaging materials — Permanence — Vocabulary
|
|
Imaging materials — Photographic film and papers — Method for determining the resistance of photographic emulsions to wet abrasion
|
|
Imaging materials — Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
|
|
Imaging materials — Photographic activity test for enclosure materials — Processed silver‐gelatin and dye‐gelatin prints
|
|
Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide
|
|
Imaging materials — Processed photographic plates — Storage practices
|
|
Imaging materials — Thermally processed silver microfilm — Specifications for stability
|
|
Imaging materials — Reflection prints — Storage practices
|
|
Imaging materials — Compact discs (CD-ROM) — Method for estimating the life expectancy based on the effects of temperature and relative humidity
|
|
Imaging materials — Processed photographic films — Methods for determining scratch resistance
|
|
Imaging materials — Polyester-base magnetic tape — Storage practices
|
|
Imaging materials — Test method for Arrhenius-type predictions
|
|
Imaging materials — Optical disc media — Storage practices
|
|
Imaging materials — Information stored on magneto-optical (MO) discs — Method for estimating the life expectancy based on the effects of temperature and relative humidity
|
|
Imaging materials — Unprocessed photographic films and papers — Storage practices
|
|
Imaging materials — Wet-processed silver-gelatin type black-and-white photographic reflection prints — Specifications for dark storage
|
|
Imaging materials — Pictorial colour reflection prints — Methods for evaluating image stability under outdoor conditions
|
|
Imaging materials - Recommendations for humidity measurement and control
|
|
Imaging materials — Adhesive mounting systems — Specifications
|
|
Imaging materials — Magnetic tape — Care and handling practices for extended usage
|
|
Imaging materials — Multiple media archives — Storage environment
|
|
Imaging materials — Colour images — Determination of water resistance of printed colour images
|
|
Imaging materials — Processed colour photographs — Methods for measuring thermal stability
|
|
Imaging materials — Methods for measuring indoor light stability of photographic prints — Part 1: General guidance and requirements
|
|
Imaging materials — Methods for measuring indoor light stability of photographic prints — Part 2: Xenon‐arc lamp exposure
|
|
Imaging materials — Optical discs — Care and handling for extended storage
|
|
Imaging materials — Digital hard copy for medical imaging — Methods of measuring permanence
|
|
Imaging materials — Image permanence specification of reflection photographic prints for indoor applications — Part 1: Test methods
|
|
Imaging materials — Colour reflection prints — Test method for ozone gas fading stability
|
|
Imaging materials — Evaluation of image permanence of photographic colour prints in consumer home applications
|
|
Imaging materials — Magnetic hard drives used for image storage — Care and handling
|
|
Imaging materials — Reflection colour photographic prints — Test print construction and measurement
|
|
Imaging materials — Pictorial colour reflection prints — Comparison of image degradation observed between ISO 18930 accelerated weathering test method and outdoor exposure
|
|
Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness
|
|
Imaging materials and prints — Abrasion resistance — Part 1: General rub testing methods
|
|
Imaging materials and prints — Abrasion resistance — Part 2: Rub testing of photographic prints
|
|
Imaging materials — Photo books — Test methods for permanence and durability
|
|
Imaging materials — Reflection colour photographic prints — Method for testing stability under low humidity conditions
|
|
Imaging materials —Photographic prints — Effect of light sources on degradation under museum conditions
|
|
Imaging materials — Scratch resistance of photographic prints — Part 1: General test method
|
|
Imaging materials — Scratch resistance of photographic prints — Part 2: Sclerometer test method
|
|
Photography — Digital cameras — Chromatic displacement measurements
|
|
Photography — Digital cameras — Measuring low-light performance
|
|
Photography — Digital cameras — Measuring low-light performance — Amendment 1: Chroma decrease calculation
|
|
Photography — Guidelines for reliable testing of digital still cameras
|
|
Photography — Archiving Systems — Vocabulary
|
|
Photography — Archiving systems — Part 1: Best practices for digital image capture of cultural heritage material
|
|
Photography — Archiving systems — Imaging systems quality analysis — Part 1: Reflective originals
|
|
Photography — Digital cameras — Texture reproduction measurements — Part 1: Frequency characteristics measurements using cyclic pattern
|
|
Photography — Digital cameras — Part 2: Texture analysis using stochastic pattern
|
|
Photography — Digital still cameras — Battery life measurement
|
|
Imaging materials — Lenticular lens sheet — Measurements and specifications of dimensions
|
|
Photography — Psychophysical experimental methods for estimating image quality — Part 1: Overview of psychophysical elements
|
|
Photography — Psychophysical experimental methods for estimating image quality — Part 2: Triplet comparison method
|
|
Photography — Psychophysical experimental methods for estimating image quality — Part 2: Triplet comparison method — Technical Corrigendum 1
|
|
Photography — Psychophysical experimental methods for estimating image quality — Part 3: Quality ruler method
|
|
Measuring autofocus repeatability of sharpness and latency
|
|
Photography — Photographic reflection prints — Part 1: Evaluation methods of image quality
|
|
Photography — Photographic reflection prints — Part 2: Evaluation of colour variation in printing
|
|
Photography — Photographic reflection prints — Part 3: Evaluation of glossiness
|
|
Photography — Lenticular print for changing images — Measurements of image quality
|
|
Digital cameras — Measurement method for image stabilization performance — Part 1: Optical systems
|
|
Permanence and durability of commercial prints — Part 1: Definition of use profiles and guiding principles for specifications
|
|
Permanence and durability of commercial prints — Part 21: In-window display — Light and ozone stability
|
|
Permanence and durability of commercial prints — Part 22: Backlit display in indoor or shaded outdoor conditions — Light stability
|
|
Digital photography — Gain map metadata for image conversion — Part 1: Dynamic range conversion
|
|
Photography — Electronic scanners for photographic images — Dynamic range measurements
|
|
Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 1: Architecture and requirements
|
|
Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)
|
|
Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB)
|
|
Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 4: European Colour Initiative RGB colour image encoding [eciRGB (2008)]
|
|
Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 5: High dynamic range and wide colour gamut encoding for still images (HDR/WCG)
|